
About half the time, the fix is something you can check in five minutes. Work through this list before you call.
1
Check the thermostat
Make sure it’s set to Heat, not Cool or Off, and set it 5 degrees above the room temperature. If the screen is blank, replace the batteries.
2
Check the furnace power switch
It looks like a light switch on or near the furnace, and it’s easy to bump off by accident. Make sure it’s on.
3
Replace a clogged filter
A filter packed with dust can make the furnace overheat and shut itself off. If you can’t see light through it, change it.
4
Close the furnace door tightly
Most furnaces have a safety switch that keeps them off if the front panel isn’t fully closed.
5
Make sure the gas is on
The handle on the gas line to the furnace should run in line with the pipe. If other gas appliances work, gas is reaching the house.
6
Look for a blinking light
Many furnaces flash an error code through a small window. Count the blinks or snap a photo. It tells us a lot.
7
Clear the vents and returns
Furniture, rugs or closed vents can choke airflow. Open supply vents and keep return grilles clear.
Stop and call right away if…
You smell gas. Leave the house and call your gas company from outside.
A carbon monoxide alarm goes off. Get everyone out and call 911.
You smell burning or see smoke. Turn the system off at the thermostat.
Water is pooling around the furnace.
Still no heat? A part has likely failed, and most are fixed on the first visit.



